The sheets are designed for use with 65mm high and 15mm to 25mm thick brick slips. You will need to use an MS Polymer glue to stick the slips rather than a cement based adhesive due to the sheet being made of plastic.
This brick slip tracking sheet is a 1.5mm thick plastic profiled sheet for over cladding directly onto brick or block work. It is fixed to the wall using plasterboard plug fixings by drilling through the sheet with an 8mm masonry drill bit and then tapping in the fixings.
This can also be used on other substrates with different fixing types but requires a backing of suitable material. If you are building a frame construction you may wish to use one of the systems where the tracking sheet is pre-bonded onto a carrier board.
The sheet ensures that the horizontal joints are kept in alignment and can speed up and deskill the installation process of brick slips.
